 |
Coprel, due to its technical and commercial staffs, is able to offer complete solutions for every need of customers, offering both standards and “on-demand” products. |
|
| |
|
|
| |
|
|
|
|
|
| |
 |
|
 |
 DD Series
DDD Series |
DD centrifugal blowers (double suction) and DDD centrifugal blowers
(quadruplesuction with central motor), are conceived to satisfy the sophisticated needs that the designers should face in these fields: conditioning, heating, refrigeration, or everywhere else it is necessary to have big pressure with small volumes, low noise but good performance. |
|
|
 |
|
|
| |
|
|
| |
|
|
 |
CRT Series |
Centrifugal blowers are properly made for:
 aspiration of clean air or light dusty smoke (not abrasive);
cooling in general.
They’re utilized in all industrial appliances where there’s the need of small air volume together with small pressure.
The series is constituted by 3 sizes. |
|
|
|
|
|
| |
|
|
| |
|
|
|
|
|
| |
|
|
 |
TF/FF Series
TFD/FFD Series
|
Cross flow fans are particularly indicated for big air volume in limited space, with low noise and at the same time regular flow.
FF-FFD series also offer a fixing system with 4+4 extensions put on the side. |
|
|
|
|
|
| |
|
|
| |
|
|
|
|
|
| |
|
|
 |
P Series |
Single-phase, 2 shaded poles for various appliances.
These motors are extremely cheap, strong, their direction of march is irreversible and they don’t produce radio interferences. |
|
|
|
|
|
| |
|
|
| |
|
|
|
|
|
| |
|
|
 |
AX Series
SA Series
MA Series |
In this series of fans the air enters and comes out from the fan in axial way, through a
direct system of crossing.
AX series is constituted by 5 sizes.
SA series is constituted by 2 sizes.
MA series is constituted by 1 size. |
|
|
|
|
|
| |
|
|
| |
|
|
|
|
|
| |
|
|
 |
MIX Series |
Liquids stirrer is indicated for agitation of low density liquids.
The very low noise emitted and the IP56 coil bobbin assure an optimal functioning; it can also be combined with submerged centrifugal pumps. |
|
|
|
|
|
| |
|
|
| |
|
|
|
|
|
| |
|
|
 |
|
Heating elements for cross flow fans and electronic speed regulators. |
|
|
|
|
|
| |
|
|
