| |
 |
|
|
|
 |
| Type CRT05/N36 36 |
|
 |
| Type CRT05/N36 1P |
|
 |
| Type CRT05/N36 32 |
| |
 |
Attention:
All the images, schemes and photos are property of Coprel s.a.s. and are under Copyright. |
|
|
|
| Centrifugal Blowers - CRT Series |
| CRT 05N36 |
|
|
|
|
|
| Technical Specifications: |
 |
Single inlet centrifugal fan; |
|
|
2 shaded-poles impedance protected motor, built complying “CE” standards, with self-lubricating and aligning sleeve bearings, with big oil reservoir; |
|
|
model 230V/50Hz., “F” class insulation ( 155°C), power input of 18W; |
|
|
model 115V/60Hz., approved UL CSA (USR-CSR) file E204506, “A” class insulation (105°C), power input 15W; |
|
|
Fan blade with curved forward pales, made of black nylon mixed with fiberglass, with constant thickness; |
|
|
housing made with black nylon mixed with fiberglass; |
|
|
motor fixed on zincoated metal plate; |
|
|
suitable for continuous duty with room temperature between -10°C and + 60°C; |
|
|
electric supply by 6,3x0,8 mm. male faston-type connectors (axial or radial, see the scheme below), directly fixed on coil; |
|
| |
| On Request: |
|
motor VDE 1306 “B” class ( 130°C) or “H” class ( 180°C) approved; |
|
|
housing with various inlet sizes (see the scheme); |
|
|
motor with power of 20W; |
|
|
protection against dust and/or humidity; |
|
|
dustproof end-shields with “IP50” protection class; |
|
|
coil bobbin with “IP56” protection class; |
|
|
electric supply with flying cables of various lengths; |
|
|
operating voltages from 12V to 400V 50/60Hz; |
|
|
thermal protector or thermal cut off protection. |
|
 |
| ID code: |
| |
 |
|
| Faston Position: |
|
|
|
| Dimensions: |
|
 |
|
| Versions: |
|
 |
|
| Static Pressure Courve: |
|
 |
|
| |
| All motors, fans and blowers are manufactured in our factory in Pieve Emanuele (Milano – Italy). Dimensions and specifications can vary. We reserve ourselves the right to make changes anytime we consider it’s the case. |
|
|
CRT 05N36
