| |
 |
|
|
|
 |
Attention:
All the images, schemes and photos are property of Coprel s.a.s. and are under Copyright. |
|
|
|
| Centrifugal Blowers - CRT Series |
| CRT 010 |
|
|
|
|
|
| Technical Specifications: |
 |
single inlet centrifugal fan; |
|
|
single-phase, 2 shaded-poles, impedance protected motor, built complying “CE” standards, with self lubricating and aligning sleeve bearings with big oil reservoir; |
|
|
power input: 55W with operating voltage 230V 50Hz; |
|
|
motor with “F” insulation class ( 155°C); |
|
|
fan blade with curved forward pales, made of black nylon mixed with fiberglass, with constant thickness; |
|
|
housing made of black nylon mixed with fiberglass; |
|
|
motor fixed on zincoated metal plate; |
|
|
suitable for continuous duty with room temperature between -10°C and + 60°C; |
|
|
electric supply by 6,3x0,8mm male faston-type connectors directly fixed on coil (see the scheme below); |
|
| |
| On Request: |
|
fan blade with curved forward pales, made of aluminium; |
|
|
protection against dust and/or humidity; |
|
|
dustproof end-shields with “IP50” protection class; |
|
|
coil bobbin with “IP56” class protection; |
|
|
electric supply with flying cables of various lengths; |
|
|
operating voltages between 12V and 400V 50/60Hz; |
|
|
motor with “H” insulation class ( 180°C); |
|
|
2 speeds motor or double voltage; |
|
|
motor cap made of black nylon mixed with fiberglass; |
|
|
thermal protector or thermal cut off protection; |
|
|
version built complying UL-CSA standards; |
|
|
double shield bearings (ZZ). |
|
 |
| ID code: |
| |
 |
|
| Faston Position: |
|
|
|
| Dimensions: |
|
 |
|
| Static Pressure Courve: |
|
 |
|
| |
| All motors, fans and blowers are manufactured in our factory in Pieve Emanuele (Milano – Italy). Dimensions and specifications can vary. We reserve ourselves the right to make changes anytime we consider it’s the case. |
|
|
CRT 05N36
