| |
 |
|
|
 |
Attention:
All the images, schemes and photos are property of Coprel s.a.s. and are under Copyright. |
|
|
|
| Centrifugal Blowers |
| DDD Series |
|
|
|
|
|
| Technical Specifications: |
 |
quadruple suction centrifugal blower, with central motor position; |
|
|
single-phase, 2 shaded-poles, impedance protected motor, built complying “CE” standards, with self lubricating and aligning sleeve bearings with big oil reservoir; |
|
|
motor with “F” insulation class ( 155°C); |
|
|
suitable for continuous duty with room temperature between -10°C and + 60°C; |
|
|
electric supply by 6,3x0,8mm male faston-type connectors, directly fixed on coil; |
|
|
two double suction fan blades with curved forward pales, made of aluminium with constant thickness 76 mm diameter and with internal strengthening disc; |
|
|
two housings made of zincoated sheet. |
|
| |
| On Request: |
|
coil bobbin with “IP56” protection class; |
|
|
dustproof end-shields with “IP50” protection class; |
|
|
operating voltages between 12V and 400V 50/60Hz; |
|
|
double voltage and/or double or triple rotation speed; |
|
|
electric supply with flying cables of various lengths; |
|
|
thermal protector or thermal cut off protection; |
|
|
housings with superficial cataphoresis treatment; |
|
|
version built complying UL-CSA standards; |
|
|
“BB” version with two 626ZZ ball bearings type on the motor. |
|
 |
| ID code: |
| |
 |
|
| Dimensions: |
|
 |
|
| Versions: |
|
| Type |
Fan |
Input power |
A
mm |
B
mm |
C
mm |
D
mm |
E
mm |
F
mm |
| W |
A |
| DDD 76/96 |
Ø 76x86 |
60 |
0,48 |
104 |
86 |
114 |
47 |
120 |
77 |
|
|
|
| Static Pressure Courve: |
|
 |
|
| |
| All motors, fans and blowers are manufactured in our factory in Pieve Emanuele (Milano – Italy). Dimensions and specifications can vary. We reserve ourselves the right to make changes anytime we consider it’s the case. |
|
|
DD Series
