| |
 |
|
|
|
 |
| |
 |
Attention:
All the images, schemes and photos are property of Coprel s.a.s. and are under Copyright. |
|
| |
|
|
| Axial Flow Fans - MA Series |
| MA 15INC |
|
|
|
|
|
| Featuring Specifications: |
 |
axial-flow fan, with wall ring made of black nylon mixed with fiberglass; |
|
|
Single phase, 2 shaded poles, impedance protected motor, built complying “CE” standards, with self-lubricating and self-aligning sleeve bearings, with big oil reservoir; |
|
|
motor with “F” insulation class ( 155°C); |
|
|
coil bobbin with “IP56” protection class; |
|
|
electric supply by tripolar wire of 1,5m. of length; |
|
|
operating voltages between 12V and 400V 50/60Hz; |
|
|
fan blade made of nylon mixed with fiberglass. |
|
| |
| Technical Specifications: |
|
air flow rate: 90m3/h; |
|
|
absorbed power 17W; |
|
|
revs. per minute 2600. |
|
| |
| On Request: |
|
wall ring made of plate and superficial treatment with epoxydic varnish; |
|
|
fan blade made of aluminium with these technical specifications: air flow rate 110m3/h – absorbed power 17W; |
|
|
motor with “H” insulation class ( 180°C); |
|
|
electric supply by tripolar wires of various lengths; |
|
|
coil bobbin with various protection classes. |
|
 |
| Dimensions: |
|
 |
|
| |
| All motors, fans and blowers are manufactured in our factory in Pieve Emanuele (Milano – Italy). Dimensions and specifications can vary. We reserve ourselves the right to make changes anytime we consider it’s the case. |
|
|
AX Series
