| |
 |
|
| |
 |
Attention:
All the images, schemes and photos are property of Coprel s.a.s. and are under Copyright. |
|
| |
|
|
| Stirrers - MIX Series |
|
|
|
|
|
| Technical Specifications: |
 |
single-phase, 2 shaded-poles, impedance protected motor, built complying “CE” standards, with self lubricating and aligning sleeve bearings with big oil reservoir; |
|
|
motor with “F” insulation class ( 155°C); |
|
|
coil bobbin with “IP56” protection class; |
|
|
Inox steel AISI 304 driving shaft; |
|
|
electric supply by tripolar wire of 1m. of length. |
|
| |
| On Request: |
|
electric supply with cables of various lengths; |
|
|
dustproof end-shields with “IP50” protection class; |
|
|
coil bobbin with “IP00” protection class; |
|
|
operating voltages between 12V and 400V 50/60Hz; |
|
|
thermal protector or thermal cut off protection; |
|
|
fastening with little brass columns; |
|
|
version built complying UL-CSA standards; |
|
|
double shield bearings (ZZ). |
|
 |
| Dimensions: |
|
 |
|
| Versions: |
|
| Type |
Motor |
Input power |
Dimensions |
| A |
W |
A mm |
B mm |
| MIX-15 INC |
P.15 |
0,140 |
17 |
155 |
47 |
| MIX-20 INC |
P.20 |
0,160 |
20 |
150 |
52 |
| MIX-30 INC |
P.30 |
0,200 |
29 |
140 |
62 |
| MIX-35 INC |
P.35 |
0,280 |
35 |
135 |
67 |
| MIX-40 INC |
P.40 |
0,330 |
40 |
130 |
72 |
|
|
|
| |
| All motors, fans and blowers are manufactured in our factory in Pieve Emanuele (Milano – Italy). Dimensions and specifications can vary. We reserve ourselves the right to make changes anytime we consider it’s the case. |
|
|
MIX Series
